Ansicht
Dokumentation

CPI7F9E - Retransmitted frames limit reached on line &23, network interface &30. ( OS/400 )

Vendor Master (General Section)   BAL_S_LOG - Application Log: Log header data  
This documentation is copyright by IBM.


Message : CPI7F9E
Retransmitted frames limit reached on line &23, network interface &30.

Message Long Text :

Cause . . . . . : The following may have caused the problem:
-- The ISDN network equipment or the remote DTE may not be operating correctly, or may have been temporarily busy, and could not respond to frames sent by the local system.
-- The ISDN line quality may be poor.
-- Contact problems with the ISDN cable connectors.
-- The local environment may be electrically noisy.
Recovery . . . : You may choose to ignore this message because your line is operational. If you suspect poor line quality, consult your local ISDN network provider. Verify that the cable is securely connected to the appropriate receptacles and that the cable is in good physical condition. If suspected, try eliminating the source of any electrical noise. You may change the frequency of occurrence of this message by adjusting the value of the THRESHOLD parameter, using the CHGLINIDLC command. If the problem still persists, run the ANZPRB command to report the problem.
Technical description . . . . . . . . : The number of retransmitted frames sent during a specified time period exceeded the limit and caused this message to be displayed. This can occur if the remote exits a busy condition, then begins accepting retransmitted frames, or if the remote rejects the send sequence (Ns) count in frames sent by the local system, because previous frames were lost.

- Processor Resource ....: &26
- Adapter Resource ......: &27
- Port Resource .........: &28

Message File : QCPFMSG
Library Message File : QSYS2924


ROGBILLS - Synchronize billing plans   Vendor Master (General Section)  
This documentation is copyright by IBM.

Length: 3270 Date: 20240426 Time: 085110     sap01-206 ( 3 ms )