Kontakt

Ansicht
Dokumentation

_ISUAMI_000001 - Define Advanced Meter Capabilities

_ISUAMI_000001 - Define Advanced Meter Capabilities

Fill RESBD Structure from EBP Component Structure   General Material Data  
This documentation is copyright by SAP AG.
SAP E-Book

In this activity, you make the settings for the advanced metering system and for the devices used in the advanced metering infrastructure. The SAP Utilities processes take both the advanced meter system and the devices into account. For more information, see the Example section.

  • Settings for Capabilities of Advanced Metering System (AMS)
Under Capabilities of Advanced Metering System, you define the capabilities of the software.
  • Settings for Capabilities of Device
Under Capability Group of Device, you define the capabilities of the device.

In this activity, you can also define which capabilities are permitted for devices of a certain device category, and which AMI data is entered automatically when you create a device. You make these settings in the Determination Groups sections.

You allocate the determination groups to device categories in the application. The allocation of advanced metering systems (AMS) and advanced meter capability groups (AMCG) to the determination groups determines which AMS and which advanced meter capabilities are permitted for all devices created for a specific device category. The system automatically enters the AMS and AMCG marked as default into the AMI data when you create a device.

The following advanced meter capabilities are predefined by SAP:

  • Remote disconnection
  • Remote reconnection
  • Remote meter reading
  • Manual meter reading using AMS
  • On-demand meter reading (this is only possible if the AMI capability Remote Meter Reading is activated)
  • Request operational state
  • Receive messages

Only the AMI capabilities predefined by SAP are taken into account in the SAP Utilities processes.

  1. Under Advanced Meter Capabilities, display the AMI capabilities predefined by SAP.
Use the checkboxes to define which AMI capabilities can be allocated to advanced metering systems (AMS-Relevant) and devices (AMCG-Relevant) at a later stage.
If necessary, you can define additional AMI capabilities in namespace 9*.
Note:
Note that only the AMI capabilities predefined by SAP are taken into account in the SAP Utilities processes.
  1. Make the settings for the capabilities of the AMS:
    1. Under Capability Group of Advanced Metering System, define one or more capability groups.
    2. Select each capability group and, under Capabilities of Advanced Metering System, allocate AMI capabilities
      You can only allocate AMI capabilities for which the AMS-Rel. checkbox is selected under Advanced Meter Capabilities.
    3. In the Advanced Metering System section, define one or more AMS.
Specify from when the AMS is valid and allocate it an AMS capability group.
You can also allocate an MDUS, which you defined previously under Meter Data Unification and Synchronization.
Note:
The allocation of an MDUS does not have any controlling function.

  1. Make the settings for the capabilities of the device:
    1. Under Capability Group of Device, define one or more capability groups.
    2. Select each capability group and, under Capabilities of Device, allocate AMI capabilities
      You can only allocate AMI capabilities for which the AMCG-Rel. checkbox is selected under Advanced Meter Capabilities.
  2. Make the settings for the permitted capabilities for the devices of a device category and for the AMI data to be entered automatically when you create a device.
    1. Under Advanced Metering System Determination Group, define one or more determination groups for advanced metering systems (AMS).
    2. Select each determination group and, under Advanced Metering System of a Determination Group, allocate one or more advanced metering systems (AMS).
      You can select one of the allocated AMS as default; the system then enters this AMS automatically into the AMI data when you create a device.
    3. Under Advanced Meter Capability Group Determination Group, define one or more determination groups for advanced meter capabilities.
    4. Select each determination group and, under Advanced Meter Capability Group Determination Group, allocate one or more advanced meter capability group (AMCG).
      You can select one of the allocated AMCG as default; the system then enters this AMCG automatically into the AMI data when you create a device.
      You can use the AMCG Obs. checkbox (AMCG is Obsolete) to control that the system does not take this AMCG into account and that the user can no longer allocate this AMCG to a device.

Settings for AMS and Device Within an Advanced Metering Infrastructure

The advanced metering system has the capability Remote Disconnection

-> AMI capability 1 – Remote Disconnection is allocated in the capability group of the advanced metering system.

The device does not have the capability Remote Disconnection

-> AMI capability 1 – Remote Disconnection is not allocated in the capability group of the device.

The process of remote disconnection cannot take place as the AMS has this capability but the device does not. The SAP Utilities processes always take both the AMS and the device into account and require both to have this capability.






Addresses (Business Address Services)   SUBST_MERGE_LIST - merge external lists to one complete list with #if... logic for R3up  
This documentation is copyright by SAP AG.

Length: 6935 Date: 20240523 Time: 174715     sap01-206 ( 101 ms )