Ansicht
Dokumentation
_ISUDMMR_000004 - Parameters for FVD Validation for Devices not Allocated to Installations
General Data in Customer Master Vendor Master (General Section)This documentation is copyright by SAP AG.
In this IMG activity, you define parameters for fixed value deviation (FVD) validations for devices not allocated to installations. Devices not allocated to installations are devices that are physically installed but not relevant to billing. For these devices, you can specify a value used for calculating the maximum permissible deviation of a meter reading from the previous meter reading. The permissible deviation is calculated based on the number of places after the decimal point in a register.
| UM | Fixed val. dev. |
|---|---|
| KWH | 50 |
A fixed value of 50 KWH was defined for devices without an installation structure with KWH as the unit of measurement. For registers with two places after the decimal, the maximum permissible deviation from the previous meter reading is +/- 0.50 KWH. For registers with one place after the decimal point, the permissible deviation is 5.0 KWH.
Read the online documentation for the Fixed value deviation of devices without installation allocation field.
- Choose New entries.
- Define fixed value deviations in conjunction with the unit of measurement for devices not allocated to installations.
General Data in Customer Master BAL_S_LOG - Application Log: Log header data
This documentation is copyright by SAP AG.
Length: 1702 Date: 20240523 Time: 155651 sap01-206 ( 38 ms )
